Expert Answers about Toyota Wheel Locks

• Will The Rackem Magnum Wheel Lock # RA-25 Prevent Wheel From Turning
• It would be very hard for someone to move the trailer with the Rack'em Magnum Wheel Lock, part # RA-25, attached to your wheel. When the unit is locked the prongs will not move, but the prongs are designed to go through the wheel hole. The tire would have to drive over the lock unit each time the wheel rotated for the wheel to turn. With opportunity and time a determined thief will normally get the item they are after. Using the wheel lock will help deter theft and make your trailer harder...
  view full answer...


• Lock For Fulton Hi-Mount Spare Tire Carrier
• While there isn't an individual high-mount spare tire carrier and lock set, you can add a wheel lock to go with the Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels # FSTC1000301. Assuming you have 1/2" wheel bolts, all you need is the Wheel Lock Set for 1/2" Wheel Bolts # RG01-150.
  view full answer...


• Will Rackem Magnum Wheel Lock # RA-25 Still Work If a Thief Deflates the Trailer Tire
• My technical contact at Rackem earnestly believes even if a thief deflated the tires on the trailer that the Rackem Magnum Wheel Lock # RA-25 would not be defeated. This lock clamps onto the actual wheel of the trailer and does so extremely snug. With that being said, even if the tire was deflated, the ability for the lock to move while locked on the wheel does not change meaning it will still not move. The trailer would be able to move a bit forward however the lock would either hit...
  view full answer...


• Can the Ends of the Rackem Magnum Wheel Lock be Cut with Bolt Cutters
• I pulled the Rack em Magnum Wheel Lock, # RA-25, and found that it measured 1 inch x 7/8 of an inch at its narrowest point at the end of the arms. It would be difficult for a thief to use bolt cutters to cut through the arms of this wheel lock and if they did manage to do so, cutting near the ends of the arms will most likely not be enough to actually remove the lock from the wheel. They would have to cut through a thicker section to remove the lock. One thing to remember is that locks...
  view full answer...


• Recommended Padlocks To Prevent Theft Of The Demco 5th Wheel Rail Adapter
• The pin used to lock the latches of the Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package - 21K # DM6333 in place is 0.313 x 1.00 inch so a lock with a 1/4 diameter shackle will be able to fit and prevent theives from being able to open the latches and take off with your rail adapter. For a lock with a 1/4" diameter shackle you can use the Master Lock Covered Solid Body Padlocks # 141T, which will give you two padlocks to lock both sets of latches.
  view full answer...


• Are All Blaylock EZ Trailer Wheel Locks Keyed Alike
• There is always a possibility that someone with the same wheel lock like part # BLEZ-300 could have the same lock and lock number. When ordering the BLEZ-300 on our website there is a drop down menu that allows you to select keyed alike(for a fee), or keyed unique. This would give you the option to use the same key for multiple wheel locks.
  view full answer...


• Theft Prevention Recommendations for a 5th Wheel Trailer
• You could remove your breakaway switch pin while your trailer is in storage, however, a determined thief will get what they want in the end. If he went through the trouble to break in and attempt steal your trailer, it would not be a problem for him to simply cut the wires from the breakaway switch. Cutting the wires from the breakaway switch would be fast and easy. Another factor to consider is that the battery will only last for a short time and it will drain completely. Leaving the...
  view full answer...


• Can etrailer 5th Wheel King Pin Lock be Ordered With Specific Lock Number
• The etrailer.com 5th Wheel Trailer King Pin Lock # e98896 cannot be ordered with a specific lock number to match what you currently have. What you can do if you want all of your king pin locks keyed alike is order order as many as you need of this lock and select the "Keyed Alike" option on the drop down box. I have added a link to a video review of this lock for you to check out as well.
  view full answer...


• Can a Magnum Wheel Lock be Keyed Alike?
• Yes, you can purchase multiple Magnum Wheel Locks, # RA-25, with the same key number. It is easiest to purchase them at the same time and select the "Keyed Alike" option, which will ensure that they are the same number.
  view full answer...


• How to Lock Convert-A-Ball CAB-C5G Cushioned 5th-Wheel-to-Gooseneck Adapter
• The # CAB-C5G Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter can easily be locked by using a padlock like part # ML4140LH. . You'd pass the shackle of the lock through the locking handle slot and out the hole in the foot of the coupler. This prevents the coupler from being opened, so it can be used while the trailer is hitched or when it's not. Either way, the lock will help deter theft by making it difficult to unlock the coupler.
  view full answer...


• Is the Lock Mechanism on the Lock-em Magnum Wheel Lock # RA-25 Replaceable or Permanent
• The Rack-em Manufacturing Lock-em Magnum Wheel Lock, part # RA-25, uses a replaceable tubular lock mechanism. We offer the replacement lock assembly as part # RA25LOCK, which comes with two tubular keys. The replacement procedure is simple enough: two spring-loaded dowels (one on each side) are pressed inward to unlock the internal housing which then slides out to reveal the access point for removing the original lock. This internal assembly fits snugly so a screwdriver will help to loosen...
  view full answer...


• Should The Steering Be Locked When Flat Towing A Keyless Car
• Since you're looking at the Blue Ox Base Plate Kit # BX1312 I assume you're trying to flat tow your vehicle. If this is the case then you would not want to lock the steering wheel up under any circumstance. Locking the wheel will prevent the front wheels from turning with the motorhome as you make turns and will just drag the car and ruin your wheels. Every vehicle that can be flat towed has a list of instructions in the owner's manual that will set the vehicle into neutral to prevent damage....
  view full answer...


• How Much Does the Trimax Adjustable Wheel Lock Weigh
• The Trimax Adjustable Wheel Lock part # TMX65FR weighs around 18 lbs. It's designed for most 10" - 18" wheels for either vehicles or trailers. The device stops the wheel from rotating i.e. preventing theft and the clamp covers the lug nuts so you won't just be able to remove the wheel either. It comes with keys and a tool needed for installation.
  view full answer...


• Best Lock For B&W 5th Wheel Hitch Head
• While there isn't a replacement pin lock or padlock that will work, B&W has told us the best way to lock the hitch head is by using a cable lock. For that I recommend an adjustable cable lock: - Python Adjustable Cable Lock # 8419DPF The reason I like the Python lock is because it lets you adjust the locking mechanism to the length you want to tighten it around the hitch so there is no slack. The lock is also heavy-duty, made with 5/16" diameter braided steel designed specifically to...
  view full answer...


• Can a Replacement Key For The Club Steering Wheel Lock Be Cut Without An Original Key?
• Typically a locksmith will use the cut key from The Club Vehicle Steering Wheel Lock # WI900YELLOW to cut the Blank Key # WI490KEY. I first recommend contacting your local locksmiths to determine if they have the capability to cut the blank without having a cut key to match. They may be able to remove your lock cylinder and cut the key to operate the lock.
  view full answer...


• Can Keys be Made For Club Twin Hooks Vehicle Steering Wheel Lock
• While it cannot be ordered with extra keys, you can have duplicate keys made for the Club Twin Hooks Vehicle Steering Wheel Lock # WI3000. It comes with two so you would need to get four made if you need a total of six.
  view full answer...


• How to Lock 5th Wheel Hitch
• That's going to depend on which 5th wheel hitch you have and whether it mounts via industry standard bed rails or via an OEM puck system. If you have a industry standard rail mounted hitch, you can replace one of the existing pins that hold the hitch to the bed rails with a locking pin like # TR63254. If your hitch doesn't use bed rails, please reply with the manufacturer and the model number of your hitch, and let me know how it mounts, and I'd be happy to help.
  view full answer...


• Can Ark XO Trailer Jack be Stowed in Vertical Position
• Technically you could stow the Xtreme Off-Road Swing-Up Jack # ORJW500D in the vertical position if you really wanted to, and yes the wheels will still lock, though clearance would likely be an issue if stowed that way. If at all possible and you can move the cargo basket or just flip the jack up and turn the wheels downwards on the # ORJW500D while traveling that would be ideal.
  view full answer...


• Is There A Master Key for the Ultra-Fab 5th Wheel King Pin Lock?
• No, there is no master key for the Ultra-Fab 5th Wheel King Pin Lock # UF48-979008 so no one will be able to just come by and take it off. The only way they'd be able to remove this is to use the provided keys.
  view full answer...


• Are etrailer.com 5th Wheel Trailer King Pin Lock Keys Keyed All the Same
• The etrailer.com 5th Wheel Trailer King Pin Lock comes with keys that are specific to each individual king pin lock, so you don't have to worry about someone using his King Pin lock key to open yours. I have linked you to a product demonstration video for the # e98896 that you might find helpful.
  view full answer...